M3D Tough 3D Ink - Raven Purple

Tough 3D Ink is a proprietary non-toxic thermoplastic blend made exclusively by M3D. Tough offers unprecedented utility for 3D printing due to its strength and controlled amount of flexibility. When compared to traditional filaments which have a fraction of the bond strength and are typically brittle when printed, Tough 3D Ink is bonded at full strength, allowing you to print longer-lasting objects. Tough is great for medium and large models that need to hold up in the real world or need lots of give. Pro Tip: Feed Externally. When using Tough, manually calibrate the nozzle 0.3mm higher at all corners and in the center. This will help prevent the first layer from being scraped as the second layer is applied.

Features:

-Guaranteed filament length: 250ft / 76.2m

-Estimated product weight: 0.55lb / 250g

-Shore hardness: 90A

-Material density (ISO 1183): 1.19g/cm3

-Recommended extrusion temperature: 220 - 240°C

-Recommended heated print bed temperature: 45 - 60°C when used, but it is not required

-Recommended build surfaces: M3D printbed sheet, painter's tape, glue stick, glass plate, PEI

-Other printer requirements: Part cooling fan