Cessna 172 Skyhawk (G1000) Autopilot Profile
With the Flight Panels Autopilot Profile for the Cessna 172 Skyhawk (G1000), you can control autopilot, communications, navigation, EFIS, transponder, internal lighting and more, all from the Stream Deck +’s physical buttons, LCD touchscreen and rotary dials.

Watch speed, heading, vertical speed, altitude and frequencies update in real time as you turn the dials, adding a new level of realism to your flight simulation experience.

For a comprehensive list of features and functionality (which may vary between aircraft), please see below.

Flight Control Panel 1 (FCP)
Button Controls: Auto Pilot (AP), Flight Director (FD), Heading (HDG), Altitude (ALT), NAV, VNAV, Approach Mode (APR), & Back Course (BC). Rotary Dials & LCD Screen: Real-time values for course, heading, altitude, and vertical speed. Rotate the rotary dials left or right to increase or decrease values.

Course: Press the rotary dial to center course, tap the screen to toggle GPS/LOC1/LOC2; Heading: Press the rotary dial or tap the screen to sync heading; Altitude: Press the rotary dial to toggle FLC mode or tap the screen to toggle 1000/100 increments; Vertical Speed (V/S): Press the rotary dial or tap the screen to toggle VS.

Flight Control Panel 2 (FCP) / Communications
Button Controls: V/S, FLC, Nose Up, Nose Down. Rotary Dials & LCD Screen: Real-time frequency values for COM1/COM2 (Active and Standby). Rotate rotary dials 1 and 2 to change the standby frequency for COM1 and dials 3 & 4 for COM2. Tap the screen or press a rotary dial to swap between Standby and Active.

Navigation
Button Controls: COM1 Mic, COM1, COM2 Mic, COM2, DME, ADF, NAV1, NAV2. Rotary Dials & LCD Screen: Real-time frequency values for NAV1/NAV2 (Active and Standby). Rotate rotary dials 1 and 2 to change the standby frequency for NAV1 and dials 3 & 4 for NAV2. Tap the screen or press a rotary dial to swap between Standby and Active.

Transponder
Button Controls: COM1 Mic, COM1, COM2 Mic, COM2, MKR Mute, DSP BACKUP. Rotary Dials: Rotate the rotary dials to increase or decrease each of the transponder digits.

Flight Management System (FMS)
Button Controls: Direct To, Menu, Flight Plan, Procedures, Clear, Enter, PFD/MFD Swap. Rotary Dials:  FMS Outer / Inner: Rotate the dials to control the FMS Knobs, Press the knob for CRS CTR, or tap the screen to press ENT; BARO: Press the rotary dial to toggle STD mode or tap the screen to HPA/InHg.

Lighting
Button Controls: Beacon, Landing, Taxi, Nav, Strobe, Captain Overhead Light, FO Overhead Light, Rear Overhead Light. Rotary Dials: Rotate the rotary dials to increase or decrease light intensity.