Shopping security
The Elkay LMABF8WSLK is an ezH2O® Bottle Filling Station with a mechanically activated single ADA cooler, filtered and refrigerated, delivering 8.0 GPH of chilled water. Finished in Light Gray Granite, it pairs an electronic bottle filler with mechanical front and side pushbars, laminar flow, Green Ticker™, Flexi-Guard® Safety Bubbler, Real Drain, and a visual LED filter monitor for reliable indoor hydration.
Key Specifications:
Features & Benefits:
What's Included:
Q: Does the LMABF8WSLK include filtration?
A: Yes. The included 51300C WaterSentry® Filter is certified to NSF/ANSI standards with a capacity of 3,000 gallons or 1 year. The LED Visual Filter Monitor indicates when replacement is needed.
Q: How do I reset the filter monitor after replacement?
A: Press the program button for ~2 seconds until “RST FLTR” appears, press again to show “FLTR =”, then confirm to “FLTR = 0”. The Green LED will illuminate when reset is complete.
Q: What warranty is included?
A: Elkay provides a 5‑year limited warranty on the refrigeration system and a 12‑month warranty on electrical components and the water system (drinking water applications).
Q: Can this unit be installed outdoors?
A: No. LMABF8WSLK is rated for indoor use only.
Q: Are accessories available for installation and maintenance?
A: Yes. Recommended accessories include the 51300C WaterSentry® Filter (replacement), and the MLP100 In‑Wall Carrier for structural support. A cane apron for EMABF Gray Granite (98313C) is also available—contact us for details.
Cooling System: Hermetically‑sealed reciprocating compressor with lifetime lubrication, fan‑cooled condenser, and copper tubing fully insulated with EPS foam. Uses R‑134a refrigerant metered by capillary tube. Factory‑preset thermostat requires minimal adjustment.
Accessibility & Resilience: Electronic bottle filler sensor reduces touchpoints; mechanical pushbars ensure water delivery even during electronic service interruptions. ADA and ICC A117.1 compliant when installed per standards.
Installation Notes: Maintain 6" minimum rear ventilation clearance; use dielectric coupling and non‑metallic strainer; installer‑provided plastic drain trap isolates from building plumbing. New installations require GFCI. Stream height for the bubbler is optimized to strike ~6‑1/2" from the spout into the basin; adjust CW to raise, CCW to lower.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us now
Ships within 48 hours · Estimated delivery Jun 21 - Jun 26
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order