Introducing Hokus Pokus Decor-Weaves for Decoupage Enthusiasts
Experience the remarkable world of Hokus Pokus Decor-Weaves, a collection of decoupage products expertly crafted from a uniquely woven material. These Decor-Weaves boast an extraordinary quality – they remain free from wrinkles, creases, and tears during the process of decoupage art creation. Even while the material is still damp, you have the freedom to lift and reposition it without any fear of tearing. This distinctive woven decoupage material promises to captivate you with its effortless utility and versatility.
Packaging Dimensions: 31.5cm x 25cm

Detailed instructions are conveniently located on the back of the package, ensuring a seamless and enjoyable creative process.

Hokus Pokus Décor-Weave designs are highly detailed expressions of art which can be applied to natural wood, painted furniture or a surface of your choice.
Requirements for applying a Hokus Pokus Décor-Weave: 1.) a piece of furniture or project which has been completed to a smooth finish, painted or sanded natural wood
2.) a Décor-weave Design; 3.) paint brush; 4.) brayer; 5.) water-based sealer
6.) 400 grit sand paper; 7.) clean water 8.) clean cloth; 9.) Iron
Optional extra is a glass of wine
With the iron on a COOL, DRY (NOT STEAM) setting, gently iron the back of your
Décor-Weave design to remove initial fold lines.
The prepared furniture piece: wipe down with a wet cloth to remove all the dust.
It is vitally important to remove all excess dust before applying any Hokus Pokus Décor-Weave to your project.
Sharp pieces of wood splinters or chipped paint, no matter how small, can spoil the surface and texture of your Décor-Weave project.
All painted surfaces must be 100% dry to avoid the Hokus Pokus Décor-Weave from lifting or creating air bubbles.
Always plan beforehand where you are going to place your Hokus Pokus Décor-Weave and cut to size, if needed.
Applying the Décor-weave: Apply a base coat of a good quality polyurethane water-based sealer, while still wet place the Hokus Pokus Décor-Weave in the desired place, ensure all air bubbles are removed by rolling with a brayer.
Wait about 30 min then apply a 1st coat of sealer over the Hokus Pokus
Décor-Weave, wait until 100% dry then apply a 2nd coat and 3rd coat, ensure the surface is completely dry as per manufacturer’s instructions – don’t rush this phase. Once 100% dried and cured, gently sand the whole design with 400 grit sandpaper to a smooth texture. Clean with a wet cloth.
The last very important step is to sit back and enjoy your masterpiece then share your project on our Hokus Pokus Instagram, Facebook or Pinterest pages.