Developed in the evolution of the Etnica TT, maintaining the iconic design appreciated throughout the world, it blends consolidated classic technical concepts with innovative technology obtaining very high performance.

Boiler steam pressure management
The boiler pressure is controlled via a high-precision pressure transducer which allows adjustment of the boiler temperature via the display, with a greater adjustment range. To provide additional safety and continuity of work, the transducer is supported by an NTC probe which, in addition to detecting the temperature in the boiler, can also control it in the event of the pressure transducer not working. The precision and speed of repetition of the readings of the pressure values leads to a stability and reactivity of the thermal of the machine as the pressure of the boiler varies by a few hundredths of a bar which is equivalent to a very limited thermal oscillation of approximately 0,2°C compared to at 3,5°C of a machine with a traditional thermoregulation system with an electromechanical pressure switch in which during thermal maintenance, pressure variations of the order of 0.2 bar occur. With this pressure control, Etnica Evolution maximizes the thermal stability of the machine even during intensive use, significantly increasing its thermal capacity.

 

Energy saving
It is emphasised during all stand-by thanks to the independent electronic control of each one of 3 legs of the heating element, where the consumption drops to 1400 watt from a peak of 4200 watt.
Etnica Evolution is available with a copper boiler of greater thickness (standard boiler 13 lt diam. 205mm or optional flanged boiler 13.5 lt diam. 205mm.) equipped with a certified 10mm thick insulation for further energy saving.

Easier technical maintenance through:
- extractable drawer containing all the electrical and electronic controls of the machine so that it can be extracted for any intervention without having to remain near the machine and therefore without hindering the barista's work
- intuitive and tidy wiring by separating the low voltage part from the high voltage part with all named branches (cables)
- manual boiler water filling for manual use or in the event of any malfunctions due to external causes
- possibility of replacing the water inlet solenoid valve in the boiler by asking for the inlet and outlet taps of the solenoid valve and therefore without having to turn off the machine or turn off the water supply or empty the boiler

Accessory functions:
alarm alerts, the automatic on/off timer, the bar's day off, the language, turning the machine on/off, counter page, customizing the barista password, adjusting the sensitivity of the level probe based on the hardness of the water, programming and warning of maintenance cycles, filter replacement, boiler load synchronization, maximum boiler load time.