M8 Circular Connector Male/Female 3 Pole Cable 2m (Bag of 2)

This Victron Energy M8 circular connector cable provides a 3-pole male-to-female connection on a 2-metre lead. It is used primarily in Battery Management System (BMS) wiring, connecting compatible Victron components that use the M8 circular connector standard. Supplied as a bag of two cables.

Key Features

• M8 circular connector format with 3-pole male and female ends on a single cable.
• 2-metre cable length provides flexibility in panel, cabinet and battery enclosure installations.
• Supplied as a bag of two cables, reducing the need for separate orders on multi-connection installations.
• Designed for use with Victron BMS and compatible battery management wiring applications.
• Lightweight at 0.11 kg per bag, suitable for use in space-constrained enclosures.
• SKU ASS030560200, GTIN 8719076019879, sourced directly from Victron Energy.

Product Overview

The M8 circular connector is a standard interface used across a range of Victron Energy BMS and battery-related products. The 3-pole configuration carries the signal or low-voltage connections required between BMS units, battery monitors and associated control hardware. The male-to-female arrangement allows cables to be daisy-chained or extended where the standard fixed cable on a device does not reach the target connection point.

At 2 metres, the cable gives sufficient reach for most battery cabinet and enclosure layouts without excess slack. Having two cables in each bag is practical for installations where multiple connections of the same type are needed, such as systems with parallel battery banks or multiple BMS nodes.

Specifications

• SKU: ASS030560200
• GTIN: 8719076019879
• Connector type: M8 circular, 3-pole
• Ends: Male and female
• Cable length: 2 metres
• Pack quantity: 2 cables per bag
• Weight: 0.11 kg (per bag)

Applications

• Victron BMS signal and control wiring in lithium battery systems.
• Extending or replacing existing M8 3-pole connections in battery enclosures.
• Multi-battery bank installations requiring additional BMS interconnect cables.
• Off-grid and marine battery management system wiring.
• Replacement cabling for damaged or short factory-fitted M8 leads.

What Is Included

• 2 x M8 circular connector male/female 3-pole cables, each 2 metres in length.

Installation Notes

These cables carry low-voltage BMS signals and should be installed in accordance with the wiring requirements of the connected Victron equipment. Ensure the correct pole orientation before connecting. For battery systems involving lithium chemistry or high-capacity banks, installation should be carried out by a qualified electrician or a competent person familiar with Victron BMS architecture. Do not use these cables for mains voltage or high-current power connections.