SCS 3001818, Static Shield Bag, 1000 Series Metal-In Zip, 18X18, 100 Pack

This transparent metal-in static shielding bag is designed to provide a static safe environment for ESD sensitive electronic devices. Bags are printed with an ESD protective symbol and a lot code for traceability. Open top (1000 Series) and ZipTop (3000 Series) styles are available. The bags are heat sealable. SCS Static Shielding Bags 1000 Series are manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior being static dissipative allows electrostatic charges to be removed when grounded.

• Metal-In Film Laminate 0.0028” thick (2.8 mil)
  Protects ESD sensitive contents from electrostatic fields and electrostatic discharges (ESD)
• <10 nJ Discharge Shielding Energy Limit Test per ANSI/ESD STM11.31
  Meets ANSI/ESD S20.20 and ANSI/ESD S541 requirements for ESD shielding packaging inside and outside an ESD Protected Area (EPA)
• Dissipative Inner and Outer Surfaces Rs 1 x 10⁴ to <1 x 10¹¹ ohms per ANSI/ESD STM11.11 and Static Control Bag ANSI/ESD S11.4 Level 3
  Allows bag to be used throughout an ESD Protected Area and grounded when placed on a grounded surface or handled by a grounded operator
• Printed with ESD Protective Symbol and Lot Code Information
  Meets the requirements of ANSI/ESD S541 for quality control purposes
• OpenTop and ZipTop styles are available
• Lead-free RoHS 2, REACH and Conflict Minerals Compliant
• Made in the United States of America
  This item is made in Sanford, NC. Many sizes are stocked in Sanford, NC or Chino, CA for fast delivery.
• 1000 Series - Metal-In Static Shielding Bag

SCS Series 1000 Static Shielding Bags TDS

SCS Static Control Bag Storage Information