SCS 770089, Table Mat Roll, Rubber, R3, Gray, 48 in x 50 ft

The SCS 770089 is a 48″ × 50 ft roll of R3 Series dissipative rubber worksurface mat in Gray — the widest format in the R3 Gray series, designed for large workbenches, multi-operator stations, and production line applications where a single seamless mat needs to cover the full bench width. The inherently dissipative nitrile rubber compound delivers stable, humidity-independent electrical performance across the entire surface for the life of the mat.

Specifications

Key Features

• 48″ Width — Widest R3 Gray Format: Covers large workbenches and multi-operator stations with a single seamless mat — cut to any length from the 50 ft roll.
• Dissipative Top Layer: 1×10⁶ to <1×10⁹ Ω Rtt — meets ANSI/ESD S20.20 worksurface required limit and ANSI/ESD S4.1 recommendation.
• Conductive Black Bottom Layer: Supports continuous workstation monitor compatibility. Electricals will not drift for the life of the mat.
• Non-Humidity Dependent: Consistent electrical performance year-round regardless of ambient conditions.
• Soldering Application Ready: Resists abrasion, tearing, flux, and soldering iron contact.
• Neutral Gray Color: Suits facilities with gray workstation color-coding or neutral worksurface preferences.
• Lot Traceability & RoHS 2/REACH Compliant: Made in the USA.

Frequently Asked Questions

What is the difference between the SCS 770088 (36″) and 770089 (48″) gray mat rolls?

Both are electrically identical R3 Series gray rubber mats. The 770088 is 36″ wide, suited for deep single-operator or dual-operator benches. The 770089 is 48″ wide — the widest format in the R3 Gray series — designed for large workbenches, multi-operator stations, and production line applications where maximum seamless coverage is required. Both come in 50 ft rolls for cutting to length on-site.

Is the SCS 770089 compatible with continuous workstation monitors?

Yes. The conductive black bottom layer provides a reliable Rtg path compatible with continuous workstation monitors verifying both wrist strap and mat ground connections simultaneously.

Does the SCS R3 Gray mat comply with ANSI/ESD S20.20?

Yes. The 770089 meets the ANSI/ESD S20.20 worksurface required limit, tested per ANSI/ESD STM4.1-2017 and ESD TR53. Top layer resistance of 1×10⁶ to <1×10⁹ Ω Rtt meets both the S20.20 required limit and the ANSI/ESD S4.1 recommendation.

What sizes are available in the SCS R3 Gray series?

The R3 Gray series is available in 24″ (770086), 30″ (770087), 36″ (770088), and 48″ (770089) widths, all in 50 ft rolls, plus a pre-cut 24″ × 48″ kit with grounding hardware (SCS 770090).

Browse all ESD Mats at MTE Solutions →